Martin Levelling Components · Martin manufacturer family rendering; representative size and optional accessories may differ.Stainless steel feet / Machine support
15200
Stainless Steel Foot, Medium Load, Articulated, Bolt/Down
Medium-load stainless supports with articulated stems and bolt-down variants.
Catalog row verified · application review required- Thread designation
- M14x2
- Base diameter
- 80 mm
- Published static load
- 2000 daN
Engineering reference
Specifications.
| Specification | Value |
|---|---|
| Overall height | 70 mmPublished: 70.0 mm |
| Static capacity | 2000 daNPublished: 20000 N |
| Minimum published temperature | Not verified |
| Maximum published temperature | Not verified |
| Product mass | 0.38 kgPublished: 380 g |
| Base diameter | 80 mmPublished: 80 mm |
| Stem length | 50 mmPublished: 50,00 mm |
| Thread designation | M14x2 |
| Thread system | metric |
| Base material | AISI 304 stainless steel |
| Stem material | AISI 304 stainless steel |
| Articulation | 5 °Published: 5 ° |
| Anchoring arrangement | Two bolt-down holes |
| Pad material | None |
| Published load conditions | Static load at half of the threaded-stem length. Vibration or moving loads require a manufacturer-approved reduction; do not use as a dynamic rating. |
| Adjustment range | Not verified |
| Minimum height | Not verified |
| Thread standard | Metric |
| Published load values | 20000 NPublished: 20000 N |
| Anchoring-hole spacing | 62 mmPublished: 62 mm |
| Base height | 11.5 mmPublished: 11,5 mm |
| Bushing diameter | Not verified |
| Bushing length | Not verified |
| Floor distance | 20 mmPublished: 20 mm |
| Height H1 | Not verified |
| Height H | 70 mmPublished: 70,00 mm |
| Maximum adjustment height | Not verified |
| Pad hardness | Not applicable |
| Published dynamic support load | Not verified |
| Surface finish | TURNED FINISHING |
| Covered thread | Not verified |